Description
Rokamat Dry Plaster Finishing Machine 110V
The plaster finishing machine for purists – without any frills whatsoever. That makes the PFM the lightest plaster finishing machine in our portfolio (hand tool only 1,3 kg). This is ensured by the well-established and reliable Rokamat concept: the separation of hand tool and motor (the latter is worn on a belt or shoulder strap). In addition to reducing weight, this feature also largely protects the motor from soiling.
What once had to be done laboriously by hand can now easily be done by machine. Select any speed between 75-340 min-1, thus adapting it to fit your requirements.
The PFM is not just suited for plaster finishing. Thanks to a wide scope of accessories it is also ideal for smoothing of concrete elements and gypsum multi finish.
The special connection tube allows for an unobstructed view on the working surface and makes it possible to reach higher areas, too.
Whether it is plaster, lime-cement render, clay plaster, synthetic resin plaster, mineral plaster or silicate plaster – the PFM is just itching to get to work!
The PFM was formerly knows as ROKAMAT DRY.
Applications
- Machining plaster, lime-cement render and clay plaster
- Abrading render and plaster
- Gypsum multi finish
- Machining of fine finish plaster
- Smoothing concrete elements
- Sponging filler compounds
Advantages
- Light weight
- Uniform structure due to large support surface (Ø 350 mm)
- Time- and cost-saving (approx. 50 % time saving compared to manual work)
- Continuous speed control (optimal adjustment to each application)
Technical data
- Idle engine speed 75-340 rpm
- Total weight with accessory 4,9 kg
- Accessory Ø 250/350 mm
Scope of supply
- Plaster finishing machine
- Strap
- Supporting plate with Velcro
- Sponge disc Ø 350 mm (Item no. 49300)
- Case