Description
Plastermate 2m jig
How it works:
Ashlar Cuts
Using Monocouche Render
Traditionally ashlar cuts in monocouche render were formed by applying 23mm of render to the wall, then using a 2×1 lath fixed along the chalk line, an ashlar cutter tool was drawn along to create a 5mm cut…
…No More
Using the Plastermate alongside the newly created ashlar tool, a perfect 5mm x 20mm ashlar is achieved every time without the need for laths.
Traditionally ashlar cuts in sand and cement we’re created using 2″ x 1″ splayed laths…
…No More
Plastermate comes with a specially designed trowel allowing ashlar cuts to be created quickly and easily.
Once the second coat of plaster is applied simply straighten, flat and mark a chalk line.
Offer up the tool, and with the specially designed tool, create the Ashlar.
Can you afford not to have it?
With Plastermate you don’t need to:
>> Use Machine Laths
>> Erect laths
>> Fill in between laths
>> Get laths to sit level on scratch or external corners
>> Strip laths after application
>> Clean laths after application
>> Fill in between quoins
>> Worry about breaking edges or corners
Plastermate Saves You Money!
>> Plastermate is a brand-new tool
>> Developed by plasters for plasters
>> Designed to save professional plasterers time and money
>> Save at least 50% of your time and 75% of your costs